Understanding the Components of a Water Filtration System
To figure out how much room you'll need, let’s start by looking at the components that make up a typical water filtration system:
Pre-Filters: These capture sediment, dirt, and debris before water reaches the main filtration unit.
Main Filter Tank: This is the heart of your system and can include activated carbon, resin, or other media that remove contaminants and soften your water.
Brine Tank (for softeners): If your system includes a softener, it will likely include a salt tank to regenerate the media inside.
Bypass Valves and Plumbing Lines: These allow you to control water flow and isolate the system for maintenance.
Each of these components varies in size depending on your home’s needs. For example, a 2-person household in Tulsa may need a smaller system than a family of six with high water usage.
Minimum Space Needed for Whole Home Water Filtration
As a general rule of thumb, we recommend a minimum of 3 feet by 2 feet of floor space for a basic Whole Home Water Filtration setup. You’ll also need vertical clearance at least 4 to 5 feet to accommodate the height of the tanks and provide enough room for installation and servicing.
Here’s a breakdown of average space needs for a typical Water Right Water Filter setup:
Filter tank height: 48–62 inches
Tank diameter: 10–13 inches
Brine tank footprint: 18–24 inches wide
Clearance around system for maintenance: 6–12 inches on all sides
We always assess the space in your garage, utility closet, or mechanical room to determine the best placement. And since we're local plumbers in Tulsa, we know the common layouts in homes across the area, and we work with what you have.
Ideal Locations to Install Your Water Filtration System
Where should your water filtration system go? These are the most common places we install them:
Garage: Most Tulsa homes have room in the garage where the main water line enters the home.
Utility Room: If your water heater is located inside, we may be able to tie into the main water supply here.
Crawl Space or Basement: Some homes allow for filtration systems to be mounted here, though accessibility for maintenance is a key factor.
Outside (in a protective enclosure): In some cases, systems can be installed outside, but this requires weatherproofing and insulation to prevent freezing.